Create A WI-Fi Jammer

Create A WI-Fi Jammer



This guide will explain how to create a Wi-Fi Jammer affordable and functional, for more information subscribe us.

🗂 Requirements:

● Computer;
● Node MCU;
● The File .bin;
● Source of energy (ex: powerbank);
● Tab Esp8266;
● Micro USB cable;

📋 Configuration guide:

1️⃣ Download the necessary files (Linked at the bottom of the post).
2️⃣ Connect the board Esp8266 to the PC with the micro USB cable.
3️⃣ Open Node MCU and select the item "COM Port" to "COM6"(May vary depending on the coupon, generally is never COM1).
4️⃣ From Node MCU  navigate to "Config" and pressing the first gear to the right, select the location where you saved the file .bin.
5️⃣ From Node MCU switch to "Advanced" and "Flash speed" select the "80 MHz".
6️⃣ From Node MCU scroll to "Operation" and press "Flash (F)".

✅ Coupon configured with success.

📱 Guide to Use:

1️⃣ Connect the board to a power source.
2️⃣ Connect any device to Wi-Fi created by the board.
💾 SSID (Default): pwned
🔑 Password (Default): deauther
3️⃣ Access to the browser on the device and connect to the IP "192.168.4.1".

✅ Access to run properly. From this point on is very intuitive to use, for more info, subscribe us.